menu

Code Life

 45,035

Code Life Ventilator Challenge: MADE for All

An optimization race to yield a safe, approved, sub-$1000 ventilator based on the Code Life Ventilator Challenge design finalists.

This challenge is closed

stage:
Closed
prize:
$100,000 to $300,000

This challenge is closed

Partners
more
Summary
Timeline
Updates7
Forum1
Teams213
FAQ
Partners & Advisors
Code Life Designs
Summary

Overview

 

Race to a sub-$1000, Health-Canada approved ventilator production package for the Code Life Ventilator Finalist Designs

 

We must vastly reduce manufacturing costs of the ventilators that we so critically need right now, in order to save lives worldwide.

The COVID-19 pandemic has revealed the worldwide ventilation shortage and healthcare disparity between countries. 

Medical devices, like pharmaceuticals, must be affordable, to uphold the quality of human lives across the planet: this is a McGill Third Century Challenge. Engine is McGill’s technology and innovation hub, pushing technological innovation for the greater social good. Teaming up with Code Life Ventilator partners, Engine launches the Made for All Manufacturing Challenge to produce low-cost ventilators that can be manufactured locally around the world. 

Respiratory illnesses, including COVID-19, but also Acute respiratory distress syndrome (ARDS) and viral pneumonia, sometimes necessitate respiratory assistance with ventilators. Long before the pandemic hit, many lives in developing countries have been lost due to shortages of ventilators needed to treat a variety of respiratory ailments. The Code Life Ventilator Challenge catalyzed three low-cost, easy-to-build and easy-to-use ventilator designs. Now what is needed is to finalize and ready those designs for manufacture worldwide.  

 

How it works

The Made for All challenge will run in two phases—Team Formation, and The Sprint.

Team Formation phase—global teams of manufacturing and compliance experts get together—to include an industrial engineer, design engineer, medical device expert, technical writer, and a clinical respiratory expert. Each formed team pitches the Finalists of the Code Life Ventilator Challenge, to be selected as the Made for All Team to work on their design. At the end of this phase there will be three Made for All Teams. 

The Sprint—all three Made for All Teams race to be the first to obtain Health Canada approval for their device and make a final manufacturing package for a ventilator costing less than $1000 CAD. 

 

Fundraising Goal

Up to $300,000 will be awarded in compensation to the first Made for All Sprint Team to cross the finish line, in exchange for the final manufacturing package and license to share worldwide with competent manufacturers. $100,000 has generously been donated by the Montreal General Hospital Foundation already, and McGill Engine, the Faculty of Engineering Innovation and Entrepreneurship centre, seeks to raise$200,000 to support this important initiative. 

Call for Expertise. McGill Engine needs your expertise for the manufacturing and regulatory panels that will evaluate the project. If you are interested please contact us

 

Ventilators for the World

The Made for All Sprint participants will join their Code Life Ventilator Challenge Finalist colleagues to grant a low-cost license to their manufacturing package so that these safe, low-cost, optimized-for-manufacturing designs can be shared worldwide with manufacturers that are committed to low-cost manufacturing for the next 18 months. 

Time is of the essence: join McGill Engine in completing the next phase of the vital and life-saving Code Life Ventilator Challenge by greatly reducing ventilator manufacturing costs. 

 

Organizers

Dr. Peter Goldberg - Director, Clinical Care Centre, McGill University Health Centre (MUHC)

Professor Reza Farivar - Canada Research Chair in Integrative Neuroscience

Professor Benoit Boulet - Director, McGill Engine

Vivian Diniz - Business Development Officer, McGill Engine

Katya Marc - Associate Director, McGill Engine

Elise Monaghan Joubert - Associate Director, McGill Faculty of Engineering University Advancement

 


Guidelines

 

PLEASE CHECK BACK FREQUENTLY FOR UPDATES/CHANGES TO THE GUIDELINES

 

Team Eligibility

Teams must have the technical and financial means to produce the manufacturing prototype of the proposed design(s) and obtain regulatory approval from Health Canada or the FDA.

Teams must also be composed of at least 5 people and include, but not limited to:

  • an independent expert physician or respiratory therapist capable of signing off on the clinical adequacy and performance
  • a subject matter expert, able to guide and attest to the compliance of the device with ISO standards
  • an industrial engineer, to direct the preparation of a professional, optimized manufacturing package
  • an industrial designer, to direct the optimization of the final device and its usability
  • a technical writer, to prepare compliant documentation for installation, use, etc, of the device
  • a software engineer with medical device programming experience, to guide and attest to certifiable software for the devices

Competition

1. Pitching phase

Each candidate team must select a design among the three design teams: Haply, IFPR Brazil or Lung Carburetor. The candidate team will then prepare a pitch for the respective design team.

The pitch should be as concise as possible and must outline the team’s capabilities and expertise and the reasons why the team should be selected to optimize the chosen design to manufacture a ventilator for less than $1,000 CAD while still complying with the Health Canada or FDA regulatory requirements (under COVID-related or interim-authorization accelerated review process, for example) 

Each design team will have two weeks to review all the corresponding design pitches and select one candidate team to move on to the design optimization phase. 

2. Design Optimization Race

Once the candidate teams are selected by the design teams, they must notify the sponsors and submit a formal agreement between them, showing agreement on items such as IP and licensing.  They will then have until Dec. 1st, 2020 (approximately 90 days) to produce a manufacturing package for the corresponding ventilator design and obtain approval for human use from either Health Canada or the FDA, or have at least interim approval for COVID Ventilators.

Candidate teams will then work to optimize the chosen ventilator design to allow the production of a ventilator for $1000 CAD or less. Teams must produce a manufacturing package that will be reviewed and judged by experts based on defined manufacturability and financial criteria. Candidate teams will also have ongoing access to consultants (e.g. aPriori) to assist the cost optimization process.

The manufacturing package must comprise a full package composed of any documents or other materials such as prototypes, designs and design histories, instructions, procedures, methods of construction, compositions of matter, models, specially designed tools, communications, texts, presentations or videos relating to the Challenge, and as needed by other manufacturers to adopt the design for production at their facility and obtain regulatory approval for that device. 

In addition to the manufacturing package, the teams must provide access to the full dossier of test results and other information relevant to the regulatory approval process--essentially all material needed for another manufacturer to be able to file for rapid authorization to produce the device. 

3. Winner Announcement

The first candidate team to successfully complete a Financial Assessment and obtain Regulatory Approval by Health Canada or FDA will win the challenge and receive compensation up to $300,000 CAD.

 

Additional Information

Information on the design teams

Information on the Ventilator Designs will be made available by material and documents provided by the Design Teams to the Candidate Teams. Some of these will be shared on this site.

Please stay tuned for updates.

Timeline
Updates7

Challenge Updates

Reminder! Deadline for Submission tomorrow Sep 15, 2020, 5pm EDT

Sept. 14, 2020, 3:25 p.m. PDT by Vivian Diniz

Dear participants, 

Please be reminded that tomorrow, Sept. 15, 2020, 5 p.m. EDT is the registration and submission deadline.

This is the deadline by which you must register and make a pitch to the Code Life Ventilator Challenge Finalists.

Thank you!


Reminder - Q&A Session with the Design Teams on Sep 3, 2020!

Sept. 1, 2020, 5:47 a.m. PDT by Vivian Diniz

We will be hosting an online Q&A Session with the Design Teams on Sep 3, 2020, 9:00-10:30am EDT, Montreal, Canada! 

You will have an opportunity to ask questions and learn more about the Code Life Ventilator unique designs!

Please register for the Q&A Session here

Once registered, you will receive the invitation to the Q&A Session. 

Please note that you need to be registered in the Made For All challenge on the HeroX platform in order to participate in the Q&A Session. 


Q&A Session with the Design Teams on Sep 3, 2020!

Aug. 28, 2020, 11:37 a.m. PDT by Vivian Diniz

We will be hosting an online Q&A Session with the Design Teams on Sep 3, 2020, 9:00-10:30am EDT, Montreal, Canada! 

You will have an opportunity to ask questions and learn more about the Code Life Ventilator unique designs!

Please register for the Q&A Session here

Once registered, you will receive the invitation to the Q&A Session. 

Please note that you need to be registered in the Made For All challenge on the HeroX platform in order to participate in the Q&A Session. 


Changes to the Registration and Submission Deadline to Sep 15, 2020!

Aug. 25, 2020, 9:21 a.m. PDT by Vivian Diniz

Registration and Submission Deadline has changed to September 15, 2020!

Please hurry and assemble your teams to help make the Code Life Ventilator designs a reality and save lives!


The Made For All Challenge featured on Canadian Healthcare Technology and on Business Insider.

Aug. 12, 2020, 3:09 p.m. PDT by Vivian Diniz

 

The Code Life Ventilator - Made For All Challenge was featured on Canadian Healthcare Technology and on Business Insider.

 


Forum1
Teams213
FAQ
Partners & Advisors
Code Life Designs